-
Shop Talk
(
http://www.clubcobra.com/forums/shop-talk/)
| BIG529 |
02-22-2004 07:37 PM |
Total Timing For 427/351
Have a 427 Windsor and don't the the cam grind except that it is a hyraulic roller. Was wondering what total time and initial time should this size engine be running?
Any information would be appreciated.
Thanks
|
| blykins |
02-22-2004 07:42 PM |
probably about 32 degrees
|
| Perf. Eng. Eric |
02-25-2004 06:40 PM |
In our 427 Windsors we set initial timing at @14 to 16 deg. and total @ around 33 to 34 deg. Hope this helps
|
| BIG529 |
02-25-2004 06:49 PM |
Thanks for the response, it does help. I have timed the engine 17 initial and 33 total. Haven't road tested yet, will let you know.
ken
|
| DC COBRA |
02-25-2004 07:49 PM |
Don't know what the initial timing is set, but Keith has got mine set at 38 degrees total. 427 stroker, aluminum block, aluminum AFR 225 heads, 10.5 compression ratio, pump gas motor
DON
|
| Mr.Fixit |
02-26-2004 05:20 PM |
it depends on the motor, 30-34 is the expected range, with many guys running about 34. We used to do some really hot small blocks that only liked 30 total.
|
| All times are GMT -7. The time now is 01:17 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
