|
390 std pistons 10 1/2 to 1 where to get?
I have a stock 390 would like to buy std pistons 10 1/2 to 1
could anybody point me in the right direction. Manafacture , web site,part#,???? some help please. Chris eltigerz@aol.com |
|
Carroll Shelby Signature Series Pistons
Carroll Shelby Enterprises now makes forged FE pistons in most any bore size, compression ratio, pin height, and pin bore. We stock finished and semi-finished pistons, so if you have a custom or unusual application, we can finish a set to your spec.
Unusual overbores, compression ratios, or rod/stroke combos are no problem. For example, we just did a set of 12.5:1's with deep valve reliefs for a customer with a .030"-over 427 Tunnel Port using big block Chevrolet rods +.400" length, and a stroker crank. Another customer has ordered a set of 10.5:1 pistons for a 390 bored .030"-over with a 4.125" crank, LeMans rods, and non-Shelby aluminum heads. These are just a couple examples of some of the esoteric combinations we've done so far. These are not reboxed other-brand pistons. They are produced from our own forging die, made specifically for FE's. We're going to put some photos up and do an official release of this new product, but in the meantime I thought I'd just spread the word a little. Chris Weisberg Carroll Shelby Enterprises (310) 538-2914 |
thanks guys i will check out what you have given me
thanks again chris |
| All times are GMT -7. The time now is 07:32 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: