Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   1995 351 waterpump help (http://www.clubcobra.com/forums/shop-talk/53033-1995-351-waterpump-help.html)

FattyBri 04-23-2004 01:03 PM

1995 351 waterpump help
 
I have a 1995 351 that has a stock replacement waterpump on it (rotates clockwise). I would like to clean up the front of the engine so i have a short triangle belt setup running the alt, wp and crank. Ive seen some guys switch to a counterclockise rotation waterpump and mount the alternator on the passenger side. I would like to do this, but cant get a straight answer on what will work on my 1995 351. Some have told me the front cover on my motor is interchangable with a 5.0.

If this is the case its an easy fix since there is a guy who makes a kit that has the waterpump and alternator brackets.

So, will the brackets, front cover from a 5.0 work on my engine? Or does anyone know if someone makes a counterclockwise rotating waterpump for a 1995 351?

Edbo 04-23-2004 01:34 PM

I use this kit from Mike Everson.

http://www.replicaparts.com/standard...ump%20page.htm

Includes correct waterpump.

HTH, Ed

FattyBri 04-23-2004 01:37 PM

Thats the kit i would like to use, but he wasnt sure it would work on my engine. Note on that page it says Pre 1994. Mine is a 1995 block.

What year is your 393?

Trying to figure out if the 5.0s and 5.8s waterpumps are interchangeable.

Edbo 04-23-2004 02:18 PM

The timing covers are all interchangable on the block, but here's the catch...
The std and reverse waterpumps have the water passages made differently. Your main clue here is the number of waterpump mount bolts. Some are 7 bolts and some are 8 bolts.

If you have a serpentine belt on your 351 the complete kit from Mike should work fine. If you have a V belt you'll need a pump from a mid-80's 5.8 Bronco, C125-1230, std rotation, 8 bolt, driver's side inlet. That's what I run on my 393. I actually run Mike's water pump on a 5.0 that I had in the car before the 393. Sorry I mislead you.

If Mike's not sure about the pump he may also not be aware that the belt length is different, as well.

Here's a site to look at pics of timing covers. Note the differences in the water passages to the water pump.

http://www.bishopengine.com/pages/ma...pe=Ford_Covers

Ed


All times are GMT -7. The time now is 08:54 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: