|
Why do you need to calculate the blowby? Have you considered the expansion caused by heat? For the poor old Gasholes - If her lips are tight you shouldn't get any blowby:rolleyes:
Randy |
With an area that small I wonder if the flow would be laminar or random; heck, you might even get a fair amount of venturi effect at the opening.
|
blykins,
One thing that must be considered here. Compression rings do not seal because of static tension to the wall. They seal due to combustion pressure. The combustion pressure pushes the rings outward toward the cylinder wall. Gap will certainly effect the pressures imposed on the backside of the rings. However, a simple equation relative to gap will give you bad numbers. What you need to measure is BMEP relative to end gaps. And extrapolate the numbers RE: End gaps. Calculus will not get you there by itself. One must not forget the thermal effects as well. Now that I have cleared that up!!!! :LOL: :LOL: :LOL: |
...
|
what's the next problem?
|
The General and Special Unified Field Equations.
|
General and Special Unified Field Equations? Oh the easy stuff!
Can we move on to something a little more difficulty: how long would it take a one-legged grasshopper to kick all of the seeds out of a dill pickle? |
two generations?
|
is it a Kosher Dill Pickle ?
and is it a left or right legged grasshopper ? |
There are only Kosher dill pickles, all others are fakes! :)
We might need to discuss the ADA guidelines and dispensation we need to give to the one-legged grasshopper prior to determining how long he'll take to kick the seeds out of the (Kosher) dill pickle. :LOL: |
Replica ......... please .......... :D
|
| All times are GMT -7. The time now is 12:54 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: