|
Fabrication Plans for Run Stand
Has anyone fabricated a run stand for their FE and happened to document the materials needed and possibly a sketch? If so, can you please forward.
In the mean time I'll start desgining my own run stand. If I do not get a run stand design from another forum member, I'll post my design including the fabrication drawing(s), bill of materials, and basic fabrication instructions on this forum. Also, I will submit it to Lincoln as a project for their welding project site. David E. |
My run stand has 4" round tubes in a ladder configuration;) !!
|
and rubber ground isolators ? leather clad observation seats ?
|
| All times are GMT -7. The time now is 02:00 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: