Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   T-5 Shifter (http://www.clubcobra.com/forums/shop-talk/55613-t-5-shifter.html)

Wayne Zimmerman 07-13-2004 07:27 AM
T-5 Shifter
 
I have an odd question again. I made a ball for the top of my shifter handle. I got a great piece of walnut at a craft store. It was supposed to be wooden fruit, and it is sort of egg shaped with a nice feel in the hand. I added a small round cobra emplem that I picked up at a flea market and finished it in a light mahagony color and it looks and feels great. But I was going to put a threaded insert in the bottom to attach it to my T-5 shifter handle. I can't figure out what that thread size is for love nor money. None of my dies fit it and none of my taps match up. I have a small craftsman set so it is probably outside the "normal" range. Do any of you know what that thread is on a regular old T-5 shifter handle. Thanks

Wayne Z

PNJSNAK 07-13-2004 10:12 AM
I believe it is 1/2"-20, especially if you get one of the shifter handles from FinishLine.
Jim

RedBarchetta 07-13-2004 12:16 PM
Take your old shifter handle to Home Depot and go to their hardware aisle. They usually have a bunch of threaded bolts attached to a board that you can check a nut for sizing. Just put the handle up there until you find the match. :)

Mike Hausner 07-14-2004 08:28 AM
The thread on the T5 shifter should be an M12x1.75......it's a METRIC thread.


All times are GMT -7. The time now is 03:24 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: