|
Break in question...
Is one oil or weight better than another for the break-in period? :confused:
I am puting the finishing touches on my 302. I will do a little tuning and getting some bugs out while on a runstand before placement in a Cobra. Primarily street time std 302 block gt40-x heads and valve train FRPP roller rockers RPM intake Mellings HV oil pump Canton pan w/windage tray I appreciate the .02 -John |
I would use whatever your going to run. If you don't have a roller cam make sure you keep the rpm at or above 2000 for the first 20min. of running or you cam will go flat. Mike
|
Do not use synthetic for breakin. Use mineral oil and then, if you chose, switch to synthetic.
Roscoe |
Yes I do have roller cam/lifters...
Thanks for the feedback -John |
| All times are GMT -7. The time now is 02:22 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: