|
Install Ferrules??
Hi,
I am installing ferrules for my soft top but I don't know how they get fastened to the car body. The type I have does not use a nut. Right now they are just sitting in the hole I drilled. Any suggestions? Thanks Jim |
Jim:
ERA uses a snap ring on the bottom of the ferrule to keep it in place. Easy on, easy off. DonC |
Jim a picture or two would help.
Randy |
1 Attachment(s)
It is hard to tell from the picture but the ferrules have fine groves. They are not threads.
|
Drill the hole slightly smaller, coat the ferrule or hole with slicone, the gently drive the ferrule in, the grooves on the ferrule wii grip the side of the hole, the silicone helps bond the ferrule.
I can't remember what size hole I drilled but I used a micrometer on the ferrule to determine its size then used a drill bit one size smaller. Taped the hole to protect the paint,drilled the hole then with a bit of care and a judicious use of a white rubber mallet I drove the ferrules home through the 'glas. |
Anyone:
Where can I get the ferrules like those in the pictures? Right now I just have holes in the glass and I think they would be a major improvement. Thanks. |
Thanks for your answer.
Visit the site below for the ferrules. Look under soft top accessories. It will upgrade your look! http://www.cobraaccessories.com/catalog/ |
Jams, If you already have the holes drilled and they are not going to be able to grip the sides as Gary described, I understand Gorrilla glue will hold them in place.
Careful, this stuff sticks and is messy, but it holds very well. Just a thought. |
| All times are GMT -7. The time now is 03:30 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: