|
Distributor repair in Southern OH
Hey Guy,
It looks like my distributor (MSD Ready to run) for my small block ford is going to have to be looked at by a Pro. I cannot find a local distributor repair in my area Southern Ohio, or near Huntington or Charlestown WV. Can any of you guys recommend a good shop close to my area. With a distributor machines in this area. Thanks Dennis |
What's the problem?
Rick |
I think I fixed it. the bushing nut was to tight and was binding limiting movement. Loosen the lock nut 1/4 turn now it seems to move more. I'll check it with the timing light tommorrow. My mechanical advance was not all coming in. looks like my mistake tightening to much.
Later Dennis P.S. thanks for asking. |
| All times are GMT -7. The time now is 09:35 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: