|
Will these work?????
9.5" x 17" wheels by P. S Engineering, 5" backspace
Will these work, adding adapters of course, on the Ford Mustang rear end used in my Cobra build, or will the spacing be off??? Thanks, Earl |
What's the rearend length?
|
I'll have to check but I think it is 51 1/2" for some reason....Earl
|
My hub width is 59 1/2" and my build book says wheels with "standard" offset, what ever that is.
Now can someone tell me if these will work or not???? PLEASE................... |
Earl,
I am assuming that your using a solid axle 9" or 8.8" rear right? I just went through a fiasco with my Everett-Morrison Cobra as I tried to put a 52 1/2" hub to hub 9" rear in my chassis and use the standard Trigo wheels (3 1/2" b.s.). No way Jose! I ended up having to sell the rear Trigo's for dirt and order a set of custom 6" backspace rears from Phil @ PSE Wheels. If you have have a 59+" rear hub to hub, you may be in for a very rough time. You can also check the width of the body at the rear wheel arches, but I am willing to bet you can't make them fit without either narrowing the rear or locating an earlier rear that is short from the factory (1955-1959 9" are 52 1/2"). Please let me know if you have any additional questions, I hope to prevent others from feeling the pain I have been through the last 6 months. Later, Chris |
| All times are GMT -7. The time now is 03:57 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: