|
Oil pan clearance?
How far does your oil pan hang below your frame rails?
I'm getting some conflicting information on how high the frame motor mounts need to be and I thought I would check in with the experts before I cut and weld my perches. Also, my oil pan is 8" deep at the front sump. Is there a shallower oil pan that will work on a 351W stroked to 393? Thanks, Bob |
My Aviad road race pan is far from being the lowest point. THAT honor goes to my bell housing.
|
8" depth is a pretty standard depth for the 351 W. Milodon has one that is 7 1/2" deep. A dry sump pan can be considerably shallower if you've got the bucks.
|
| All times are GMT -7. The time now is 12:16 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: