-
Shop Talk
(
http://www.clubcobra.com/forums/shop-talk/)
| rbrodder |
07-01-2005 08:58 AM |
Mustang 8.8 rear axles
I have a 8.8 Rear end that I am going to use in my Cobra. It is a '94 model Mustang Limited slip with 3.08 gears. I would like to get rid of the anti lock brake rings and utilize a shorter axle for an additional inch wider rim / tire set up. I have heard of using Ranger axles to do this change. Does anyone have any insight on changing out the axles and what year Ranger axles I would need? Did the Ranger come with rear discs? Any clues would be helpful. Thanks Rich
|
| xlr8or |
07-01-2005 09:45 AM |
Rich there is an FAQ on the www.ffcobra.com site dealing with the ranger axle swap for the 5 lug conversion. I would start there. |
| All times are GMT -7. The time now is 10:06 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
