|
I really need some help...
I have SPF big block (FE) car and I need to get the passenger side header off. Is there any way of doing it without having to pull the engine way up? My header is cracked and I either need to repair or replace it, but danged if I see a way of getting it out with out a complete unistall of the engine. What about just pulling the head on that side? Will that give me enough room. Any tricks would help. Nobody around here wants to try the fix with it in the car...had it to several places already.
Thanks Buzz |
It would be easier to unbolt the motor mounts and pick the engine up than remove the head.......that's a lot bigger job....and you always risk the chance of leaky gaskets when you put it back together.
Good luck... |
| All times are GMT -7. The time now is 07:17 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: