|
8.8" Irs
Hello,
Could anyone give me some measurements of the 8.8" differential, half shafts and CV joints? 1. Diff. width 2. Diff height 3. Diff length 4. Mount locations relative rear cover 5. Pinion location relative to vertical center line 6. Output location in x & y planes relative to rear cover mnt flange and bottom of diff. 7. Inner CV length and diameter 8. Outer CV length Is the aluminum housing the same shape as the cast iron one? I'll be using Alum. I know this is asking a lot, but it would help a lot in my chassis design process. Larry had tried to send this info but it got lost when the site went down. Thanks very much, Al Keller al_keller@earthlink.net |
Hey Al,
Looks like you didn't get my email before the big crash. I do have a few measurments from my notes: Overall length :16" Overall height : 10.75" The two front mounts are 7" apart, center to center. The pinion center is 3.5" from each mount (front). The pinion is 1.5" off center and the rear mount is in line with the pinion. The output shafts to rear mount is 6". My notes don't have the overall width and I don't have CV joints to take measurments. I'm not at home at the moment to take more. As far as I know, the aluminum case is the same shape as the iron one. They mount in the same space according to FFR postings on their site. Mine is an 2003 SVT aluminum case diff. There's lots of info on the FFR site about them too. Larry |
Thanks
Larry,
Thanks so much. This will help a lot. If you can get any other measurements, that would be great. Al Keller |
| All times are GMT -7. The time now is 08:40 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: