![]() |
Inner Axle Seals?
I have a 9" Ford Coleman rear axle that came on my car which was purchased as a roller. It was leaking gear oil at the left wheel and drooling down the tire. When I pulled the drive plate and hub I found the bearings completely washed of grease by the gear oil. Apparently, there is supposed to be a tube seal on these and it wasn't installed so the gear oil from the differential was traveling out to the bearings and seal. I bought two triple seals from Coleman for the tubes but they don't come with installation instructions so now I need to know how to install these things.
They are billet aluminum, about 2.5" long with 3 neoprene rubber seals sandwiched between alum. sections. Do they go in from the 3rd member end of the tube or the drive hub end? What keeps them from spinning with the axle since the fit is going to be tight? Anyone have experience with these? Thanks. Paul |
| All times are GMT -7. The time now is 03:38 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: