|
Rear suspension ride height on a BDR
I have nearly 500 miles on BDR #340.
I have the 17" rims and 315 tires. I have noticed that the tire contacts the inner fender, particularly under acceleration, so im thinking the suspension has settled a bit. What sort of ride height are you guys putting in with a similar set up? thanks a lot cheers David |
limeyd,
With out having it in the shop to do correct ride height. You can do the finger method. I hate for you to do it this way, but it will work. You can use a two finger method in adjustment. Yes the car will settle over the first 1000 miles or so. Bill |
Thanks Bill, so where do i measure from and to with the two fingers please?
Thx |
Limeyd,
Top of the tire to the out board fender flare. Bill |
| All times are GMT -7. The time now is 04:24 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: