|
Shrouding Air filter etc
Curious to know if any of you chaps have shrouded the front or more of your air filters, so the air travels around the filter instead of straight in?
Thinking of while I adapt my tall hood scoop to allow a good sized air filter, one downside on wet days water appears as it will go on to the MSD distributor, so the idea is to build a platform over the distributor and to allow the fitment of an alloy shroud about an 1" off the filter, going up to the hood, or fiberglass setup to redirect the air right away from the filter, more around the sides, as I am not convinced the carb needs air from the scoop, any ideas! |
| All times are GMT -7. The time now is 02:17 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: