|
Testing Fuel Gauge
The stock fuel gauge in my 66 mustang is NOT working, What is the best way to test it to see if its broken or if it's possibly the Sending unit?? I tried a multmeter on it,... no continuity,.. but I don't know if it's suppose to have continuity....
Thanks RZ |
If you ground the wire going to the sending unit, the gauge should go to full. This will tell you if the gauge is workiing or not. Also, you can take the sending unit out of the tank and use an ohm meter on the sending unit to test it. The resistance should change when you move the float arm up and down. Good luck. I have to do the same with a 57 T Bird today. Jim
|
| All times are GMT -7. The time now is 06:56 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: