Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   Holley Gaskets (http://www.clubcobra.com/forums/shop-talk/77085-holley-gaskets.html)

Rick Parker 03-04-2007 07:57 PM
Holley Gaskets
 
Anyone tried using the reusable metering block & float bowl gaskets from Moroso made from Buna-N?
It is a black Nitrile Rubber, just wondering how well it seals and reacts with unleaded gasoline?

DAVID GAGNARD 03-05-2007 04:15 AM
Rick;

Have not used them, been using the blue re-useable gaskets I get at Auto-Zone and been having good luck with them so far, if you try these other gaskets, let me know how they work.........

David

Zoom This 03-05-2007 03:32 PM
Rick....I've used the gaskets referred to as Buna but not Buna-n, on both my Holley and my Barry Grant carbs. They work well, but they will stick when wrenched down hard and left that way for years. Using a little PAM spray or a light coat of WD-40 will keep them from sticking.

trularin 03-05-2007 03:40 PM
Have both, tried both, so far, both work.

Those plastic float plaugs ain't worth poop.

jarendall 03-05-2007 08:42 PM
are you talking about the clear plugs, if so, my instructions said to remove them and put the steel plugs back in after you set the floats, don't run the car with them in


All times are GMT -7. The time now is 09:06 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: