|
Quad shock mounting brackets
I've installed the rear-end in my CMC kit and found that I haven't got the quad-shock mounting brackets. I have a place that can bend up to 3/8" steel and need either blue prints or pictures with a scale or ruler next to them so that I can get them made up and continue on. Anyone in the upstate NY area that has this set-up in their CMC or Street beasts kit that I could take a look at?
|
Do you want the mounts for the frame or on the rear axle? I might have both if you want. I'm building a CMC myself and removed them. I had the axle narrowed 4" and they wouldn't fit.
Another question...does your gas tank fit? |
I built the brackets myself, used 1 1/2" flat stock about 1/4" thick, the shock that faces rear is supposed to prevent the rear from swaying, it however does not prevent rearend rollup. I had to mount a snubber on top of the rear to stop this problem, when the rearend rolls up the wheels will hit the fenders and the drive shaft universal joints will hit against the rear yoke making a loud noise, it will only do this when you get on the gas heavy, I suggest you install a snubber to start with, I can make pictures of the brackets
|
I have a CMC kit also and don't have the quad shock brackets...Picts and measurements would be great. Or if you want to sell them let me know. Frame mounts are what I need.
fsiewert@yahoo.com I havent checked to see if my gas tank fits yet..... |
Don
got my rear out of a 88 LX mustang with quad set up so the brackets were on it.made the brackets out of 1/4"X 4" flat bar and bolted to the frame.there are some pictures in my gallery.maybe this will help. Billhttp://www.clubcobra.com/photopost/d...m/100_0169.JPG |
| All times are GMT -7. The time now is 01:27 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: