Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   Pusher fan problem (http://www.clubcobra.com/forums/shop-talk/81961-pusher-fan-problem.html)

Tony Radford 09-03-2007 02:42 PM

Pusher fan problem
 
I lost one of the fan blade petals on one of my 9" pushers. Are the blades replacable on these things? I can't believe I would have to replace the whole twin fan assembly. Ouch!

computerworks 09-03-2007 02:47 PM

Quote:

Originally Posted by Tony Radford
Are the blades replacable on these things?

They should be simple metal fan blades, held onto the shaft of the motor with a collar and a set-screw....

...should be a pretty easy fix.

Xavier 09-03-2007 04:16 PM

Yes, you can probably get a nice fan blad from either mcamaster-carr or grainger. Check out their web site, you will need to know the ID of the bore on the fan blade and the OD of the blade assembly.

Tony Radford 09-03-2007 05:07 PM

...should be a pretty easy fix.

I could use one of those for a change.

fastrods 09-03-2007 09:32 PM

I believe this is it:
http://www.grainger.com/Grainger/items/4C477
You need to see if your motors have 1/4" shafts.
I used these when I needed to replace mine.
Good luck!
Bill

Tony Radford 09-04-2007 03:33 AM

Thanks Bill. I found the same part after doing a search. I pulled the bad one and it does have a quarter inch shaft. I have a Grainger not too far from the office.


All times are GMT -7. The time now is 06:16 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: