|
Ford 9" rear info
Does anyone have a drawing of proper install of ford 9" axles, including seal, bearing etc.
It has been years since I have done this stuff and not sure of proper installation. I beleive you need to press bearing on axle? Please help!! |
ford 9"
Yes, Check out the todays photos of a bunch of guys standing by a blue cobra with a big building in the back ground. In that grouping of pictures I found a good picture of a Ford 9".
Bill |
Ford 9"
Yes, you have to press the bearings on the axles. The bearings I use have the seal, which is an o-ring, that is set into and around the outer edge of the bearings. I don't recall the bearing part numbers or specs, but I have the information and can probably find it if you need it. If you don't have the tool to press on the bearings, almost any shop can do it for you.
I had a seal that was starting to leak slightly about 4 years ago so I replaced both rear bearings and seals and everything has been dry since. You can get the part number off your old bearing to order replacements. Easy fix. Good luck, Bob |
1 Attachment(s)
I will try to post a photo that I have!!
|
1 Attachment(s)
One more time with a larger photo!! Hopefully!!
|
| All times are GMT -7. The time now is 12:09 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: