|
need advice on where to start!
hi guys,
i have a NAF cobra. it is an older car. built around 1988 or so. the car has a 351 cleveland engine in it now. i have just recently purchased a 427 2x4 engine and am going to swap engines. where do i start on getting the right headers, and can i make them bolt up to my current side pipes? i have recently had my pipes ceramic coated so i was hoping that i would be able to keep them and either make or get some headers to bolt up. any help or suggestions out there? thanks in advance. anyone can also email me at tchrome@aol.com for faster response. thanks guys. tony |
| All times are GMT -7. The time now is 03:20 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: