|
Edelbrock dealers (not Summit or Jegs)
What other company's that Summit and Jegs, sell Edelbrock heads/intakes ect. ?
|
Fortes has Edelbrock products listed on their website.
http://www.fortesparts.com/Vendors.cfm I believe Mike Forte is a sponsor on CC. http://www.clubcobra.com/forums/advertisers-forum/95650-free-shipping-tremec-till-3-31-a.html |
Email me a part number and I will get you a price.
|
Edelbrock
Hi Kevin,
I can dropship Edelbrock right to your door. Do you know any part numbers? |
Polished Bare FE Heads- # 60059 (I don't have the number for the polished)
RPM intake with Enduarshine- #71054 |
Forte's Parts Connection
|
I don't see a part number or listing for a polished version of that head from Edelbrock. Where did you see it?
|
600519 for polished, bare head
600619 for polished, assembled |
You have a great speed parts source in your back yard (Speedway Motors) and there are couple guys near downtown Omaha that has a speed shop (H&M?) that are great guys to do business with. I used them when I had a little problem at Mid America Motorsports Park in Council Bluff, Iowa.
Clois |
Speedway does not carry any FE parts and limited small block fords. We get most of the sprint car parts from "Speedy Bill".
|
Jay- you have a PM
|
Hi FUNFER2,
I got all the prices we spoke about. Give me a call. |
Have to leave right now so, please e-mail them to me and I'll call when I get back. I don't know if I have your number ?
You've been a great help Mike. |
Kev, You're going to regret that RPM with the small solid roller setup you'll be running. It'll provide your horsepower cap. -Dave
|
Hey Dave, what do you mean ?
Low RPM with the lifters ? How small are you talking about ? |
Kev, You said before you were going to spec that KCR 482 with a streetable solid roller , targeting around 650-ish HP. If you run a RPM with that combo you're going to lose HP with that dual plane. You need to keep the Victor. It'll provide more of what that solid roller needs, air. You need to make sure everything you're doing matches, engine, intake, exhaust, flywheel. tranny, final drive etc. Dave
|
That's something to think & talk to Keith about. Thanks for the up & up. ;)
|
| All times are GMT -7. The time now is 02:13 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: