Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   What do I do??????? (http://www.clubcobra.com/forums/shop-talk/97394-what-do-i-do.html)

EarlsflyinCobra 06-03-2009 01:53 PM
What do I do???????
 
I am having trouble finding a place to mount my remote resivoir for my brake/clutch cylinders that is above the cylinders. What do I have to do to mount it lower than the cylinders?? Can it be done with a check valve type system?? Thanks, Earl

1985 CCX 06-03-2009 02:10 PM
Earl

If you are in a build why not consider floor mounted pedalbox? I installed this purchased unit, takes time but it was well worth it! Get's noticed at every show!
http://www.clubcobra.com/photopost/d...als_in_CCX.JPG

I am glad I bought it.....

EarlsflyinCobra 06-03-2009 02:19 PM
Well, I thought about that, but I already invested in a reverse pedal kit with the 3 cylinders attached and have it all installed. I had the remote resivoir mount location all set until it was taken over by something else....LOL......now I am looking for a new spot and I am 99% sure it will be lower than the cylinders. Thanks for the input, Earl

Jerry Clayton 06-03-2009 02:44 PM
you'll just need to do a slow roll so the fluid can gravity feed----or go over a hill top real fast so you can generate negative Gs----or in other words---it won't work!!!!

strictlypersonl 06-03-2009 03:52 PM
You can try some 2psi residual pressure valves downstream, but I really think you're better off with the reservoirs placed anywhere above the master cylinders.
Even if your feed lines dip below their level on the way.


All times are GMT -7. The time now is 10:58 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: