|
Any Snow Water/Methanol Injection experts around here??
I am in the process of installing a Snow system. I have the tank that came with the system and also a 2.5 gallon, along with an upgrade solenoid. I was thinking about mounting the small tank near the nozzle in the engine bay, which will be difficult to get to, and then mounting the larger tank in an accessible location, having it feed the smaller tank. Is this feasible, or more trouble than its worth?? :cool::cool::cool::cool::cool:
|
Okay, any NON Experts got an opinion on the 2 tank issue??:D:D:D:D
|
I don't see a problem with function, but I'd keep the whole setup as simple as possible.
Simon |
I know Dean Lampe has a swirl tank similar to what you have described that he uses on his GT 40 Dynatek set up (I know it is not for Turbo's but the principle is the same) and he has not had any problems with his set up. Good luck and I hope I haven't confused you.
Clois |
1 tank will work fine
Earlsflyincobra Earl one tank will work fine. This tank will last as long as a tank of gas. Distilled water works better than straight tap. It's only a misting unit. Make sure the flow is setup right. Just don't pump too much water through the motor. Also shut off the system and let the motor run for 20-30 seconds before turning off. This will get the water/meth mix out of the engine. The rest is test and adjust for timing and even running a cheaper gas. Rick L.
|
| All times are GMT -7. The time now is 09:04 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: