|
Soft Top Install
I am in the process of installing a soft top on my car and running into some issues. The top is a Robbins top, should fit original car configurations. Car is Hurricane which is pretty true to original.
First fitting, the rollbar seems to be an issue. It isn't overly tall. When I put the bows in, when you rotate the back hoop to its general location, it is in front of the roll bar and about an inch below the top of it. I'm following the ERA instructions, knowing I will have to cut and patch the rear window for the support bar. Does anyone have pictures of their bows in place without the top on so I can see the position in relation to the roll bar? Also, does the main hoop sit vertical or is it canted back some amount? Thanks Paul |
| All times are GMT -7. The time now is 04:27 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: