4 post car hoist wanted single phase

[hsv300]

This is the one I got had it for over 2 years now no problems at all.

[Wazza]

Originally Posted by Merv and Sharon

This one Warren?

http://www.mile-x.com/bend-pak-xpr-9-2-post-lift.aspx

Merv

Hi Merv,

Mine is a " clear floor " hoist....

i.e. the joiner bar is above the hoist....

http://www.made-in-china.com/image/2...HL9000LLD-.jpg

Good for my warehouse, 'cause I can wheel pallets under the racecar when It's up out of the way.

Cheers,
Warren

[spookypt]

Yeah, I've considered that Wazza but height and width mean it won't fit not to mention my floor wouldn't be rated to bolt it down.! Bugger!

[Merv and Sharon]

OK thanks Warren. I have a house with a 2.5 car space - pretty normal modern two car garage and I was wondering if there is anything that can be used within those parameters that still allows you to get under the car better than trolley jacks and a creeper?

Merv

[hsv300]

Merv my hoist is in a 6m wide x 18m long shed, I can get a car and caravan in and out without moving the hoist as long as you have the hight you should be fine.

Greg

[Merv and Sharon]

Don't think I do Greg. It is a standard height car garage (2.65m). I have no desire to create a shed here and was wondering if there were lifting systems that could be used to raise (certainly not to a massive degree) a car in a relatively standard garage?

Merv

[Wazza]

Originally Posted by Merv and Sharon

Don't think I do Greg. It is a standard height car garage (2.65m). I have no desire to create a shed here and was wondering if there were lifting systems that could be used to raise (certainly not to a massive degree) a car in a relatively standard garage?

Merv

Hey Merv.....

What about something along these lines.......
I'm sure you could improve on the basic design....might be fun to make as well.
http://images.google.com.au/imgres?i...a%3DN%26um%3D1

cheers

Warren.

[Merv and Sharon]

Ha! How did they get it up there?

I thought that there might be scissor style ones.

Merv

[Krait]

I can hear the sound of Triton saws buzzing away already....

Cheers

[Philm]

HI Merv,
I was able to get the cobra on the hoist and fit karens mustang undernieth.

I cut one of the rafters out ( professionally) so that the windscreen and roll bar would fit up in the roof, had it all gyrrocked and insulated.
The roof was the standard 2600mm, I was able to stand under the cobra but I suppose I am a shortass.



Sorry could only find this pic.

Phil

[Merv and Sharon]

Great idea Phil! I could do that. What lift did you buy?

Merv

PS Love the Combi/Ute

[Philm]

Its a Propark 8 from TuffLift/DirectLift.

That is Oscar, a 64 high roof Single cab has 28 000 genuine miles on it, it is one of the best unrestored Single Cabs.

I no longer have it, its a long story

Phil

[Merv and Sharon]

Oscar! I saw one today that was also a ute but with wooden 'slat' sides - for keeping the goats in! Very authentic looking piece of equipment.

Thanks Phil.

Merv