|
dipstick installation tips
Morning alll
I have put a new timing cover and seal on my Windsor block. I need to install the dipstick housing but its not like it will just press in. It is a Ford racing chrome housing. The previous timing cover I had to drill out a bit to get it in but I think that was the wrong thing to do as it may have been part of one of my leaks. Are there any tips to installing this housing in the tight hole that is in the cover. Should I get a different dipstick to install? Maybe something a bit more machined and with no chrome? I always seem to have issues with items with chrome.. lol |
Temperature changes are your friend. Put the dipstick in the freezer for about an hour or so. Put a tube of silicone selanat in there, too.
When it's good and cold, heat the front cover around the hole with a torch, spread the heat around but get it pretty warm. Take the tube and silicone out of the freezer, and put a little bit of sealant. Don't touch the tube with you hands, it will warm up too much. Assemble quickly, and it should go right together. |
Worked like a charm. Thanks so much
|
You're welcome.
|
| All times are GMT -7. The time now is 07:01 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: