|
Scattershield block plate?
Getting ready to put flywheel, pressure plate, clutch and bellhousing together on 351 cleveland. I have an Ansen scattershield but no blockplate. Looking at makeing one for it but not sure of the thickness. Does anyone have a scattershield and block plate for sale or some one that can tell me the thickness of the block plates like for a lakewood so that I can build one.
|
The Lakewood plates measure .130 " ( sounds like a generous eighth of an inch to me )
They do sell them seperately, part # 15726 for the SB Ford, comes with all the bolts etc and should sell for about $75 -$85. Mike |
| All times are GMT -7. The time now is 12:39 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: