Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Small Block Talk (http://www.clubcobra.com/forums/small-block-talk/)
-   -   I need a measurement...? (http://www.clubcobra.com/forums/small-block-talk/113768-i-need-measurement.html)

Scott S 12-30-2011 12:46 PM
I need a measurement...?
 
Can somebody get me the distance from the front cover to the outside of the crankshaft pulleys for a 302? It would be great if you have March single or double pulleys.

I am trying to squeeze a engine in behind a cross member.

Scott S

Tom Cimino 12-31-2011 06:03 AM
I hooked my tape measure to the back of the timing pointer and came up with 5 1/2 inches. I have stock steel v-belt pulleys.

Scott S 12-31-2011 07:43 AM
Quote:
Originally Posted by Tom Cimino (Post 1168036)
I hooked my tape measure to the back of the timing pointer and came up with 5 1/2 inches. I have stock steel v-belt pulleys.

Thanks, CC members are great!

Scott S

Scott S 12-31-2011 10:26 PM
Anybody with March pulleys?

Scott S

Scott S 12-31-2011 10:29 PM
Anybody with March pulleys?

Scott S

LMH 01-01-2012 08:49 AM
We just measured my brothers 347 and got 5 3/8". It has a Ford Motorsports serp pulley and a 1" spacer.
That's measured from the timing cover directly behind the balancer to the outer edge of the crank pulley.
Larry


All times are GMT -7. The time now is 06:49 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: