|
289 water jacket mismatch
I have had nothing but trouble with my small block head gaskets from day one. At some point in the near future I am going to pull the heads & have all of the "flat" surfaces checked. There has always been on thing that has made me go Hmmm & I've not thought to ask anyone if it makes a differrence on not. The water jackets above the piston, on the block, are kidney shaped. On the head it's a Round hole. The Block is a 64' & the Heads 63'. What sparked this is that I saw a block online where the hole is just the opposite & a set of heads, opposite of mine as well. Does this make a difference? I have the tools, I could theoretically bore out the holes in the head to match. Thoughts?
|
The holes in the gaskets are by design smaller to force the coolant entering the front of the block to make the journey to the rear at the block and enter the back of the heads still relatively cool enough to effectively cool the heads. So the holes in the head and block should be restricted by the gaskets anyway . Make sure the surface of the block is flat and square or you will continue to have leaks and blows....
|
I have a spare gasket, so I checked it. You are correct. There is a small hole.
So, next question. For orientation purposes, I could only find a high flow water pump when I was putting the block together. Is this going to cause any extra strain on the gasket? The problem I'm having is the gasket blowing between the piston & waterjacket. It has happened on both sides of the block now. |
I'll bet that the block needs to be surfaced
|
That's what I'm leaning towards, as well. Just trying to think everything through.
|
| All times are GMT -7. The time now is 08:56 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: