| blykins |
11-21-2012 11:34 AM |
Wow, duh....
Use some thread sealant on the threads. Check to make sure that it doesn't have an o-ring seal first, as some of the aftermarket aluminum blocks do.
|
| GBowman |
11-22-2012 05:51 AM |
Thx-is there a "special" tool to remove/install them Jay, and thx to all for the insight I appreciate it.
|
| blykins |
11-22-2012 05:59 AM |
Take a bolt head that fits it....double nut the shank or weld a nut on. Use the bolt head to loosen and tighten it.
|
| GBowman |
11-22-2012 08:22 AM |
Ill do that-thx Brent!
|
| vector1 |
11-22-2012 10:13 AM |
if it is the screw in plug with o ring i have used anti seize on the threads and o ring, makes removal lots easier.
|
| CHANMADD |
11-22-2012 10:34 AM |
In the old days, we used shellac.....I agree with Blykins, a small smear of silicone, it sucks having to use a hammer and chisel to remove parts!!
|
| vector1 |
11-22-2012 02:18 PM |
also seen em use epoxy, sucks throwing up all over the track.
|
| All times are GMT -7. The time now is 05:46 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
