| EBruce |
03-14-2015 06:09 PM |
427 Boss Block Backdraft
Well, looks like 2 of the bolts attaching the Dart block to the engine mounts have worked their way out :eek: Does anyone know the type of bolt I need to look for as it may be a good idea to reattach before the track :JEKYLHYDE
|
| sllib |
03-15-2015 09:27 AM |
Can you pull one from the other side and measure it? They should all be the same size. You will have to remove them anyway to put Loc-tite on them.
Bill
|
| EBruce |
03-15-2015 08:46 PM |
Thanks Bill took you advice and appears its 7/16 1" 14 thread. Was leery to have one bolt holding it in place if only for a minute!
|
| All times are GMT -7. The time now is 12:06 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
