|
Craft Performance 650HP SBF 427
Just thought you guys might like this build that is a little out of the box. The SBF 427 will be a going in a Superformance Cobra and our customer was looking for something a little more radical than our typical 585hp Crate Engine. We wanted something that would be a little more choppy down low yet still "drive-able" for a street car. This is a 10:1 compression pump gas engine w/ a small solid street roller camshaft (smooth lobes for lifter longevity), Our cnc Brodix Track 1 225cc heads w/ Comp Springs Ferrea Hollow Stem Valves, and Manley Titanium Retainers, port matched Edelbrock Victor Jr intake, Quick Fuel Q series Carburetor, lightweight ATI Damper, and T&D Shaft mount rockers. This engine made Max 651.1 hp @ 6500rpm and Max 603.1 ft/lbs torque @ 4800rpm. It actually kept a fairly nice torque curve throughout the pull. This thing should be a blast to drive, FE power w/ the weight of a small block.
|
Nice!!
|
Wow, very impressive.
What kind of cost are we looking at for something like this? I could use some more hp. |
Go FE Dan! C'mon!
|
Nice piece.
|
Agree - quite nice power density considering the compression ratio and sounds like it has plenty of torque below 4800 also which should make it nice to drive.
|
This engine was about $15k, complete carb to oil pan.
|
| All times are GMT -7. The time now is 06:40 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: