|
engine temp for a 351W
What is the target idling and running engine temp for a 351W? I have a 351W that's 30 over with Edelbrock performer RPM heads & cam, MSD Ignition, BG Road Demon carb on an Edelbrock Performer RPM Intake. Also using an AFCO radiator, derale 2700 cfm fan and an Edelbrock water pump.
With a 160 stat it idles at around 190 degrees. and that's with the fan running and under no load. |
Tony my 396 stroker oil temp runs about between 150 - 190 and the water temp 150 to 180. I have a 160 stat. I leave the twin pusher fans off until I come to a stop or I'm crawling along in traffic. It did run a bit hotter 190 - 210 before I got the right radiator cap and installed a catch can. These are temps I have experienced this summer during breakin. I will block off the oil cooler when the weather turns cooler.
Randy |
Tony,
I running a similar engine, 40 over, and use a 180 thermostat. Without the fan running it hangs between 165 and 180 while driving. In traffic I put the fan on and it maintains the same range. Roscoe |
Use a 180 thermostat, not a 160.
|
Tony,
Your temp seems a little high to me. I would check and see if your water pump is the correct year[new serpentine pumps run backwards] The easiest way to check this is to loosen your rad cap ,when engine is cool, and start engine. Place rags around cap and slowly lift off and see if water is being pumped towards rad when thermostat opens.,if not then you have the wrong pump. Another thing to check is the heater hoses. Do you have a manual or vacuum valve inline? If not then the water circulation will bypass the rad and heat the engine also. Good Luck, Perry.:cool: |
| All times are GMT -7. The time now is 05:51 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: