|
Help needed
Hi Guys,
I have a 1985 351W came with a 163t flexplate and a t5 and bellhousing. The 163t flexplate would not go in the bellhousing so I guess it is 157t b/housing. So I need a 157t flywheel but can you guys tell me which balance I need please. (I have searched the forum) Also could there be any other issues regarding this conversion that I will have to watch out for eg, clutch clearances etc? I have checked the tag No on the box and it originally came from a V8. Things are prety confusing at the moment as the flywheel I have is "160t" I have no idea what this was for!! Hope you can help, Regards Shane |
| All times are GMT -7. The time now is 10:18 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: