- -
help
(
http://www.clubcobra.com/forums/small-block-talk/49600-help.html)
| solo408stroker |
01-22-2004 06:36 PM |
help
i have a 408 stroker in a 351 w block. My question is this i want it to be EFI. I have trick flow tw heads with trick flow upper & lower intake 36lbs inj, 1.6 cran cams pro race rockers p/mounted. Will those heads work if i fully port them. im looking for around 450 to 540 rwhp. If not what heads/ intake combo could work.
|
Hi guy;
TFS tw heads can feed a 408 stroker?
|
| The Dreamer |
01-23-2004 06:15 PM |
The last few issues (the last 7 I think) of Muscle Mustangs and Fast Fords has done the most complete comparison test of SBF heads I have seen. They flow test and weight valve train components and then dyno all of the heads. The issues you would probably want to see are the last three or four. TFS heads were in their comparison.
|
| solo408stroker |
01-25-2004 11:34 PM |
SO WOULD THEY WORK
|
| The Dreamer |
01-26-2004 01:58 PM |
Quote:
TFS tw heads can feed a 408 stroker?
|
I might be mistaken, but I think this means YES.
Quote:
They flow test and weight valve train components and then dyno all of the heads. The issues you would probably want to see are the last three or four.
|
This means there are a lot of others that will work as well. |
| All times are GMT -7. The time now is 02:22 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
