|
Looking for hard stroker numbers
As part of my learning process prior to pulling the trigger on a replica, I'd like to see some real output numbers on a good breathing (AFR 225 or ? heads) 418-427 Windsor. At the moment, this looks like it will be my engine of choice, but while I've seen some impressive claims on various engine builders' websites, I believe in dyno sheets.
|
You have a PM.... :)
|
427W Stroker Dyno Sheet
Here are the figures from my engine at the dyno at Performance Engineering last year.
Juan |
marcocsx3121
If you take a look in my gallery, you will see a dyno sheet on my engine that I got from KIETH CRAFT. It has AFR225 heads with a decent hydraulic roller cam. It is also a pump gas motor. It was dynoed and completed in January. DON |
Very nice numbers! That motor comes close to the power I'm making with the 427 LS6 in the 'Vette. Who manufactures the aluminum block for the Windsor?
|
marcocsx3121
My particular application was the Dart aluminum block with the 4.125 bore size. That coupled with the 4.00 stroke crank gives a little more winding capabilities. Either way this motor is a beast, but it is fun, fairly easy to drive, you want horsepower itis there. Kieth really did a nice job on this motor, I am very happy with it. DON |
marco,
i have a 351/427 stroker,it has out of the box vic jrs on it,2 weeks ago on the dyno i made 426 rwhp and 422 ftlb of torque. this is a pump gas motor(93 octane),it is a blast to drive. this winter the heads are coming off to be cnc ported and i'm going to build some better primary headers,right now i'm flat outta cylinder head flow,if you decide to go with a stroker put a really good set of heads on it because you need all the airflow you can get. remember you are basically dealing with a big block with 427 cubic inches...... chris |
427 Stroker
Hi Marcos:
The block on my engine is a Dart, 4.125 cylinder bore, 4.0 stroke, 10.25 to 1 comp ratio. Comp Cam and Victor Edelbrock manifold, Demon 850 and AFR heads. Hope this helps. Juan |
| All times are GMT -7. The time now is 06:38 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: