|
Victor Junior head skimming
I need to get some 64cc Edelbrock Victor Junior heads for Small Block Chevy down to 58cc. Anybody know if they can take it and what ammount needs to be skimmed.
Thanks Guys Mike. |
Mikey B,
Here is a site that answers your question if you do the math. ( http://www.carcraft.com/techarticles/982/ ) I think you will need to angle mill towards intake side to gain quickest CC vol. This angle will then create intake to head leaks if not careful. Try the new Aluminum center bolt Vette heads, they are 58 CC and have a high velocity on runners but do have lower runner vol. They are cheap and easy to find. |
| All times are GMT -7. The time now is 03:55 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: