|
Check out my new combo
378 cubes with offset ground & internally balanced 351 crank
Chevy Rods & ACL Race series pistons, final compression 11:1 2V Oz closed chamber cylinder heads with 2.1/1.73 valves extensively ported RR's, Manley valves, Crane 3/8 pushrods MOTORSPORT SVO M-6250-A342 Cam, LIFT: 580" Inlet 606" Exhaust DURATION @ 50” 248 Inlet 258 Exhaust, Lobe separation 108 deg Modified Holley 750 Square Bore DB carby, Weiand X-elerator inlet & 1 inch spaqcer Pacemaker 1 7/8, Twin 3 inch system with x pipe and Lukey race series mufflers MSD Pro-billet Distributor, MSD 6AL Ignition Dyno output: 545 hp @ 6300 rpm Just awesome, cost approx $12k Oz |
| All times are GMT -7. The time now is 11:02 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: