- -
302 345hp crate motor
(
http://www.clubcobra.com/forums/small-block-talk/59618-302-345hp-crate-motor.html)
| soph papas |
12-10-2004 08:00 PM |
302 345hp crate motor
Ihave a venom cobra with a gt40 302 345hp motor with about 800 miles on it the motor sounds like a sewing machine called ford tech line they said its nomal anybody else have this problem
thanks soph
|
| CowtownCobra |
12-10-2004 08:03 PM |
What kind of a sewing machine?
|
| soph papas |
12-10-2004 08:25 PM |
singer
|
| Tim Brewer |
12-10-2004 10:15 PM |
Probably just still tight.....Put another 1000 miles on it and check it then.
Tim
|
| 69 Mach I |
12-11-2004 06:39 AM |
I suspect the noise is coming from your roller rockers.
|
| BRIAN@DBR |
12-19-2004 10:06 PM |
Quote:
Originally posted by 69 Mach I
I suspect the noise is coming from your roller rockers.
|
That motor does not come with Roller Rockers unless they were put on before install?? |
| soph papas |
12-20-2004 07:50 AM |
brian whats up give me a call 1845 425 4386
|
HI Brain. Nice to see you on-line again.
joe
|
| powerpagers |
01-02-2005 06:24 PM |
Motor Noise
Hey;
A sewing machine sounds better than a tractor.:CRY: :JEKYLHYDE **)
|
| lovehamr |
01-02-2005 08:25 PM |
It sounds as though your mufflers may be to quiet! LOL
|
| powerpagers |
01-04-2005 09:09 AM |
Noise ?
What mufflers ?:cool:
|
| HighPlainsDrifter |
01-08-2005 02:03 PM |
Dist gear
Hi,
I assume you are running a carb and not EFI.
The roller cam in the engine needs a steel cam gear on your distributor shaft, so you need to make sure it has one or it will get eaten away and destroy you engine. Msd distributors can have a brass gear and is too soft for long use, Ford motorsports sells a gear and any machine shop could install it on the shaft.
Good Luck,
Perry.:cool:
|
| soph papas |
01-08-2005 04:32 PM |
I have a steel gear
|
| HighPlainsDrifter |
01-08-2005 05:15 PM |
noise
Hi,
Ok, not the gear.
If you have a 5 speed standard trans it could be the throw out bearing whirring around,may be defective and need to be changed.
Perry.:cool:
|
| soph papas |
01-08-2005 06:12 PM |
sounds like a tapping from both sides ford claims its normal rockers are al tight
|
| CowtownCobra |
01-08-2005 10:20 PM |
Sounds like you need to re-adjust your valves.
|
| soph papas |
01-28-2005 04:58 PM |
they are non adjustable
|
| All times are GMT -7. The time now is 06:39 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
