|
Best Custom Header Fabricator?
After installing Keith Craft 331 in my ERA/FIA, it became apparent that the original exhaust is restrictive. I would like to send the ERA headers to a fabricator, and have the geometry of this setup duplicated, however with 1-3/4" primary tubes.
Can anyone recommend a high end shop that would be capable of doing this? Thanks! Lindy |
Rick Parker of this site has one of the best looking sets of custom made headers I have seen. You might want to send him an email.
Clois Harlan |
Lindy,
I could not be more pleased w/ the quality of my headers that I had built. They were built by Doug @ Raptor Racing in Fresno, Ca (559) 486-0689. Doug is first class as is his work. Check my gallery. Chris http://www.clubcobra.com/photopost/d.../Cobra_018.jpg |
And if you want top of the food chain in the exhaust fabrication world, talk to Chris at SPD in Rancho Cordova, CA . They are excellent. http://www.spdexhaust.com/
Good luck, John |
Boyd of Sanderson Headers in South San Francisco made a beautiful set of custom headers and exhaust for me. I would highly recommend him/them.
RodKnock |
Stahl will also build custom headers... $$$$$$
|
Thank you for the info.
I called each company mentioned, and will update those interested with pics as well as dyno results vs. the current system. Lindy |
Keith Craft's Plano TX shop has an excellent fabricator that does 2" primaries, a custom collector into the sidepipes. Does excellent work for $1100 plus shipping, including muffler and powdercoating. Check Jim Woodward's gallery for good pics of this setup. Jim picked up 54 RWHP from doing this and changing to a less restrictive "muffler".
Yes, I have sidepipe envy.... |
| All times are GMT -7. The time now is 04:14 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: