Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Small Block Talk (http://www.clubcobra.com/forums/small-block-talk/)
-   -   PVC installation on a 302 (http://www.clubcobra.com/forums/small-block-talk/77565-pvc-installation-302-a.html)

tamanaco 03-24-2007 07:56 PM
PVC installation on a 302
 
Have a FMC crate 302, what to install a PVC from breather on valve cover to the Holley carb vacuum port? Is this the best location?

Bryan Wilson 03-24-2007 08:54 PM
PCV setup
 
1 Attachment(s)
Clean air is drawn from inside the air cleaner and into one rocker cover.
Crankcase fumes and blow-by are drawn from the other rocker cover through the PCV valve and into the vacuum port at the base of the carby. (see rough drawing)
Attachment 12582
Hope this is helpful.
Cheers,
Bryan

AC Vern 03-24-2007 09:03 PM
Bryan,

Thanks for the info. I had the same question on my 302. Although I have changed it several times I have struggeled with my rear main seal leaking. A buddy has told me that it because there in not a PVC in place. Not sure he is right but it makes sense to me and a PVC is going in.

lineslinger 03-24-2007 09:31 PM
Poly-vinyl-chloride Plastic pipe or PVC

Positive Crankcase Ventilation - PCV valve

tamanaco 03-25-2007 06:03 AM
Quote:
Originally Posted by lineslinger
Poly-vinyl-chloride Plastic pipe or PVC

Positive Crankcase Ventilation - PCV valve
oops...you are correct!

Byran...thanks for the info.

Woodz428 03-25-2007 08:15 AM
Quote:
Originally Posted by tamanaco
Byran...thanks for the info.
You can't catch a break.... it's Bryan. :)


All times are GMT -7. The time now is 01:51 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: