|
cleveland
My deal fell through on my cleveland, Now I am on a search for one, can anyone help!
Thanks alot |
Cleveland vs Windsor
Why not buy a 351 W block and install a Cleveland style crank (2 3/4" mains). You have the best of both worlds. Lot of cheap parts for the Windsor and the high rpm capable of the Cleveland. They are not the same motor and if you want a Cleveland motor then a Windsor will not do. But if you want the performance of the Cleveland but not the cost and problems, Windsor is the way to go. You need to buy the FMS spacer kit ($70) and get the block line bored. Drop in the crank (408 stroker kit is very nice), rods, pistons, bolt on some good heads, intake and all that stuff that it takes to make a motor run. Bad to the bone!
imho Dwight |
Cleveland
flatred46
What kind of Cleveland are you looking for? rebuildable core, running motor? I have a friend who is a Ford mechanic that has a complete runing Cleveland for sale. I will have to check with Eddie on the details. Dwight algunruner@aol.com |
Thanks Dwight I am looking for a running 70 71 2vheads, If you could check that would be great
Thanks Phil |
I have about a half dozen, including a CJ 4 bolt engine. I have a complete '72-73( I'd have to check the #'s) 2V Cleveland that was running when I pulled it about a year ago and has been sitting in the shop since. I'd take $100 for it. I can also supply a '70,'71 and '72 casting numbered heads/block if titling requires it.
|
WDZ
Sorry it took so long to get back to you about the cleveland. Thanks for taking the time.. I am interested in one, and has that motor ever had any modifications Thanks Phil |
i have a cleveland sitting in a mustang i'd be willing to sell, can hear it run. previous owner spent approx. 11,000 having it built by anderson racing inc in grandview, mo. 2 bbl heads, 650 carb., gear driven cam, and whatever else. i don't have the receipts but did look at them. bolted to 5 spd tremec with scattershield. low time, prob. less than 5,000 mi. dynod at 500 hp, saw the sheet on this too but don't have it. runs and sounds real good on pump gas. buy the whole car drive away and save yourself some money. also have mucho 400, 351c, 351w, 302 parts sitting around anyone interested. kansas city area. mail at mj-brooksathotmaildotcom.
|
Try Tuff Dawg (D&J Performance Engines) based in Phoenix Arizona. I have just ordered mine. So far they have been great to deal with. They have an ebay shop with impressive feedback. However I didn't go the ebay route.
|
| All times are GMT -7. The time now is 12:14 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: