Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Small Block Talk (http://www.clubcobra.com/forums/small-block-talk/)
-   -   Expansion tank from Finish Line (http://www.clubcobra.com/forums/small-block-talk/79961-expansion-tank-finish-line.html)

JAC 06-20-2007 09:52 PM

Expansion tank from Finish Line
 
Does anyone know what the hose barb on the 351w expansion tank from finish line hooks up to? (the one next to the radiator hose) I understand the one on the filler neck goes to the overflow tank, but where does the other one hook up to?
Thanks for your help.

mickmate 06-20-2007 10:12 PM

I think you have a small hose fitting on the top of some radiators to hook that to. I think it is to help burp the system of trapped air due to height funky angle etc of radiator.

LMH 06-21-2007 12:40 AM

I welded a fitting on the top right tank of my radiator for the line to connect to. Lets the air vent into the tank.
Larry

JAC 06-21-2007 07:31 PM

Thanks guys, makes sense to me.

Fox 06-21-2007 07:37 PM

Here's a link to an old CC thread that answers your question.

Harrison tank connections

Hope it helps.

-John

Fox 06-21-2007 07:40 PM

OOPS... just noticed you are using the 351 style...

Consider the link above just some FYI/light reading...

-John

JAC 06-21-2007 07:51 PM

Thanks John.

jwd 06-21-2007 08:31 PM

I tried one of the Finishline tanks and it wouldn't work. The older tanks had the outlet angled down. On the new tanks, it points straight out and it hit my hood. I talked to Enzo about this and he said they were going to quit carrying them because of all the problems they've been having with them.

MFE III 06-21-2007 11:27 PM

I just exchanged emails with Enzo on this point. Like Jim, I also need the Finishline version with the radiator fitting angling down. Enzo said he'd contact the vendor to see if he could get the earlier, angled version.
Matt


All times are GMT -7. The time now is 01:00 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: