|
Ford 4.6 or 5.4
Any one using a modular 4.6 or 5.4 engine in their cobra's? I have found a great deal on a complete engine and 6-speed transmission with computer out of a 2004 cobra with really low miles on drivetrain. I would love the put a new "Cobra" engine in a Cobra. Thanks for your input
|
You need to talk to Sergio he has done it with 03 cobra in FFR, and has helped others check out his build site.http://www.cobra4me.com/
Me I'm only using the Mark VIII version in my scratchbuild. They are very large engines and won't fit in just any car. I had to build my car around it. Patrick |
Mine has the basic 03 Cobra engine except for the blower, block and fuel system. I swapped out the Eaton for a Whipple and used an aftermarket Aluminum block from Sean Hyland. The fuel system uses dual Ford GT pumps and 60# Mototrons with a custom fuel curve.
With the as delivered top pulley from Whipple and a stock lower pulley you engine will produce somewhere north of 600 FWHP and instantaneous maximum torque from about 2000 rpm to redline. BTW instantaneous maximum torque will be 550 lbs-ft sometimes a little more.:D The 5.4 will probably not fit the engine bay. The 4.6 already uses up essentially the entire bay. See Sergio's modular site => http://cobra4me.com/ for more info on the modular engine alternative. Ed |
| All times are GMT -7. The time now is 09:18 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: