|
Clutch for GForce T5
Hey everybody and Happy Thanksgiving.
I ordered a GForce T5. It has 26 splines instead of the normal 10. What are you guys who have this transmission using for a clutch? RAM, McLeod, etc. Which model? Any preferences? I've read up on the hydraulic throwout vs slave cylinder issue, but if anyone wants to comment on that fire away. |
Hays 40-121 Street/strip makes a pretty good clutch in a 26 spline and the Hays long style pressure plate or Borg and Beck pressure plate although I don't think you could go wrong with either of the two choices you posted.
|
I will be running a Hays 11" 40-221 with Hays long style p/p with my G-Force behind an FE. Was planning on going with the hydraulic t/o, but after reading all of the issues, will probably switch to a slave setup. Wish I was far enough along to give you a review on how it works...
|
Centerforce disk
I am using FMS-M-7550-T302 10.5" disk. It is a Ford Motorsport part made by Centerforce. It is 26 spline X 1 1/8 diameter shaft for a Tremec TKO transmission. It has different materials on each side of the disk; one side is organic and the flywheel side contains "wedges" of material impregnated with copper? metal. I used this disk because my car already had a good Centerforce PP when I swapped my transmission. I had this same disk in a 10 spline for my old 3550 and needed to convert to a 26 spline disk for the new TKO600.
I second disk choice was a RAM 309M. A friend of mine, with a Cobra, uses this disk with a FMS PP. Both disks work very well (smooth engagement) for the street with spirited driving on occasion. |
| All times are GMT -7. The time now is 05:39 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: