Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Small Block Talk (http://www.clubcobra.com/forums/small-block-talk/)
-   -   Needed: SBF timing pointer (http://www.clubcobra.com/forums/small-block-talk/84469-needed-sbf-timing-pointer.html)

blykins 01-16-2008 06:01 AM

Needed: SBF timing pointer
 
Does anyone have a cheap SBF timing pointer that they'd like to get rid of? I need one and the only ones I can find right now are $50 billet pointers or pointers on Ebay that cost $20 to ship them.

I want one that uses two timing cover bolts to secure it.

I'll be happy to pay and I'd rather give my money to a CC member.

Michael P. Wole 01-16-2008 07:16 AM

try finish line,,,I got one from them...or try a junk yard

turnpike boy 01-16-2008 07:18 AM

?
 
Why not just make one out of a pc. of .060" aluminum? Cut larger than needed, punch out two bolt holes, bend 90*, and trim to where TDC mark is.

ron427 01-16-2008 08:00 AM

I have one I will give you. email ron621@msn.com or call 318-343-7158. It is from a 95 Mustang Cobra and bolts to the timing cover on the passenger side with 2 bolts. I am in Louisiana. Ronald Johnson

mrmustang 01-16-2008 08:21 AM

Mustangs Unlimited has them from $7.95 to $71.95 depending on the year of the block and the style.

http://www.mustangsunlimited.com

$7.95 one covers 289/302/351W from 65-73
http://www.mustangsunlimited.com/ite...atkey=emustang

blykins 01-16-2008 08:36 AM

Guys, let me check and see which side I need. I was thinking I needed a driver's side pointer. My balancer has several sets of timing marks, so I'll have to bird dog that a little bit.

Ronald, I'll let you know. I appreciate the offer.

Scott S 01-16-2008 07:33 PM

You will need one for the opposite side of where the water pump inlet is...

Scott S

blykins 01-17-2008 06:02 AM

Scott, thanks. I figured that one out last night. I haven't assembled a SBF in awhile, couldn't remember the details. It looks like I'm a "10:00 TDC".

J Persons 01-18-2008 09:52 PM

There are also pointers with the "0" at 10, and others at 11 O'clock. It all depends on what damper you have. Most all the aftermarket timing pointers are expensive. A stock one usually sells at a dealer for around $15.00 or so.
You might also try PPI http://www.performancepartsinc.com


All times are GMT -7. The time now is 03:05 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: