|
Two possibilities that I have struck with these,
1.The rear main cap sometimes needs to be trimmed to clear the pan ( really the pan needs to be shaped to clear the cap- but its a more permanent fix to massage the cap ). While the pan fits , it distorts slightly just as you nip it up & the oil getting thrown off the crank @ high RPM finds a way out making it look like the rear main leak. 2. There are more than one dia of seal for these cranks/blocks including one that barely contacts the seal surface, make sure you have the correct seal. |
| All times are GMT -7. The time now is 11:24 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: